Banner
Title

Sport Cantilever 30 mm Mount

30 mm Tube | 2-Inch Offset

Sport Cantilever 30 mm Mount Click to Enlarge
SKU: CM-202
Alt Views
Thumbnail
Thumbnail
Thumbnail
MSRP: $129.99
*Prices in US Dollars
Reviews:
Sport Cantilever 30 mm Mount is rated 5.0 out of 5 by 27.
  • y_2018, m_10, d_20, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_en_US, sid_CM-202, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getAggregateRating, 18.21ms
  • REVIEWS, PRODUCT

Select a Model

Sport Cantilever 30mm Mount — 2-Inch Offset

Use this cantilever mount for mounting 30 mm telescopic sights onto flattop style AR-15 rifles. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on an AR-15. Aluminum construction.

Note
The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces.


VIP Unconditional Lifetime Warranty:
Our Unlimited, Unconditional Promise to You! It doesn't get any better than this.


Recommended Torque Specs
Base Screws Ring Screws
20 in/lbs 16 in/lbs
Rated 5 out of 5 by from Two seasons of 3gun and she's still zeroed I got this mount five minutes after I got the Vortex Viper PST 1-4x24 Gen 1 that I bought to use on my 3gun rifle. The mount doesn't have any knobs or levers to catch on barrel's or barricade's that my rifle is either thrown into or rested on during a 3gun match. it is also one of the lightest mounts I could find. After two years of beating my rifle, my scope and this mount around in everything that stage designers can come up with, the scope hasn't changed zero at all. I'm certain that there are more expensive mounts, and there are probably cheaper mounts. I'm not sure there is a better mount. The I brake it, they fix it warranty certainly doesn't hurt either.
Date published: 2017-08-17
Rated 5 out of 5 by from Vortex customer for life! I recently purchased the Strike Eagle 1-6×24 scope for my custom AR. My dealer had sold out of the cantilever mount so I contacted Vortex. Let me tell you, the customer service I received was absolutely amazing. Not only was the representative knowledgeable, but very friendly and we both shared quite a few laughs! I really could not believe how personable she was. When my package arrived, I was shocked to see that not only was my mount and switch view lever in there but also a t-shirt, hat and a couple stickers!! I am most definitely a Vortex customer for life!!!!
Date published: 2017-06-15
Rated 5 out of 5 by from Great mount!! I bought this mount for my strike Eagle 1-6 scope and I could not be happier with it. The 2-inch offset is perfect for my AR15, it allows you to place the scope where you want it on the rail and still be able to operate the charging handle with ease. The mount is solid and I have put about 500 rounds through my rifle with the mount attached and I have not noticed any change in zero. I would recommend this mount to anybody with a strike eagle, for the price, you can't beat this. The only thing that I would like to have would be a quick detach, but you would be paying a much higher price for that.
Date published: 2017-07-31
Rated 5 out of 5 by from It Just Works!! I used this mount to attach my 1-6 Strike Eagle to my AR. I mounted it right out of the box 18 months ago and it is still holding zero. The extended length allowed me to adjust the eye relief to my personal preference. It does what a scope mount is supposed to do; solid mount that holds zero.
Date published: 2018-03-02
Rated 5 out of 5 by from Great mount to go with scope Connects my AR to my hog hunter scope! Was easy to mount scope, actually stopped in to the store in Middleton and had you guys put my scope on and torque it correctly! Glad Im close enough to stop in and check out the newest stuff!
Date published: 2017-06-15
Rated 5 out of 5 by from Excellent mount I paired this mount with my strike eagle 1-6 and it is rock solid. After a year of chasing pigs through the thick SE Alabama brush I have not seen any shift in zero. Definitely a quality product and the price point is hard to beat!
Date published: 2018-03-01
Rated 5 out of 5 by from Perfect fit on my AR. I used this mount to put my Viper HS-T 44 on my custom 20" flattop AR build. The mount works perfectly and I could not be more impressed. I did notice the separate rail mounting piece was not perfectly flat. I do not know if it was designed to be that way or not. However I torqued everything to proper specs and there are no gaps and the mount is absolutely solid as can be. I wish that Vortex would state what size the screws where. I am still not positive what size it is but a 3mm did the trick.
Date published: 2017-06-15
Rated 5 out of 5 by from Works great with my Strike Eagle It's a flawless mount. Combo it with a Strike Eagle and a Switchview Throw Lever.
Date published: 2017-08-02
  • y_2018, m_10, d_20, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_en_US, sid_CM-202, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 12.48ms
  • REVIEWS, PRODUCT

I want to put a Strike Eagle 1-6x24 scope on my new Springfield Saint w/ Free Float Handguard.  Would the Sport Cantilever 33 mm Mount - 2 Inch Offset be a good mount to use? Is there a better mount in that price range?  

Asked by: Kenny B
Yes, the 30 mm Sport Cantilever 2 inch offset would work well for you. That's what I use on one of my AR platforms and it works great!
Answered by: Josh at Vortex Optics
Date published: 2018-10-02

How does the base mate to a picatinny mount? Please show a picture of the base.

Asked by: Bulldanish
If you look at the bottom of the mount you will see the recoil lug which fits into the picatinny rail. Please call us at 800-426-0048 Ext. 5 if you would like further assistance, we're more than happy to help.
Answered by: Josh at Vortex Optics
Date published: 2018-09-12

Is it made in U.S.A.? If not, what country?

Asked by: Bulldanish
This mount is made in China. The Pro cantilever mount is made in the U.S.A.
Answered by: Josh at Vortex Optics
Date published: 2018-09-12

I have a m1a with the ebr chassis. Will this clear my rear sight with the new strike eagle ?

Asked by: mota15
Yes, that will clear your rear sight!
Answered by: Josh at Vortex Optics
Date published: 2018-07-25

Would the crossfire 6-24×50 AO work with this mount on a flat top AR10?

Asked by: Tyler
Yes, the Crossfire II 6-24x50 AO will work in this mount on your AR.
Answered by: Graham at Vortex Optics
Date published: 2018-07-12

I just paired a 6-24 Viper HS-T with the CM-202. Does the cantilevered mount have any MOA tilled to it? The pair is mounted to my AR15 in .224 Valkyrie.

Asked by: Pop pop Moose
The CM-202 is a 0 MOA mount. If you're interested in a mount with 20 MOA built in, check out our CM-530-20 (Precision Extended Cantilever 20 MOA).
Answered by: Josh at Vortex Optics
Date published: 2018-07-09

Can this 2"off set mount be used on a Vortex Strike Eagle 1-8x24 on SIG55x rifles with original fixed iron sights ? As far as I can tell, it's going to be a close call. My wish is to mount the Vortex Strike eagle directly above the sights.

Asked by: FeldwebelCor
Give us a call at 800-426-0048 ext. 5 to discuss your setup.
Answered by: Graham at Vortex Optics
Date published: 2018-07-09

Do you need to lap these rongs

Asked by: Cas197428
You don't need to, but it would certainly help.
Answered by: Josh at Vortex Optics
Date published: 2018-07-03
  • y_2018, m_10, d_20, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_78
  • loc_en_US, sid_CM-202, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 31.36ms
  • QUESTIONS, PRODUCT
Torque Wrench Mounting Kit

Torque Wrench Mounting Kit

Tighten to the specified torque and not a bit more.

MSRP: $89.99

Buy Now: $69.99
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 27.47ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;