Banner
Title

Razor Red Dot Handgun Mounts

Most Glock Models

(Except 10mm and .45)

Razor Red Dot Handgun Mounts Click to Enlarge
SKU: MT-5102
Alt Views
Thumbnail
MSRP: $29.99
*Prices in US Dollars
Reviews:
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getAggregateRating, 40.03ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
Select a Model
GSA Contract #GS-07F-0129W

Razor Red Dot Handgun Mount

Slide mount for Razor red dot replaces Picatinny rail mount included with the Razor red dot. Allows installation on Glock handguns (except Glock 10 mm and Glock .45).



VIP Unconditional Lifetime Warranty:
Our Unlimited, Unconditional Promise to You! It doesn't get any better than this.


  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 2.56ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Any chance of seeing a similar mount made for the Venom/Viper?

Asked by: Marc
Thanks for the question! I am not aware of any plans for that at this time, but always keep up to date on our website and social media pages for new product announcements!
Answered by: Graham at Vortex Optics
Date published: 2019-01-16

I have a Glock 34 Gen 5 and I was wondering which base I need for a Vortex Red Dot?

Asked by: Jim F
Thanks for the question! I would recommend heading over to www.egwguns.com to get the proper mount for your setup.
Answered by: Graham at Vortex Optics
Date published: 2019-01-02

I have a Zev Technologies Limited Raven MOS slide and the threaded posts are no where close to alignment with my new Vortex Venom 3moa red dot sight.  What adapter plate is available that does not have any sight gap?

Asked by: Martin
Thanks for the question! I would recommend reaching out to www.egwguns.com to see if they have a mount that would work with your setup!
Answered by: Graham at Vortex Optics
Date published: 2018-09-25

I have a Glock 19 Gen4 MOS. Which mounting plate to I need to purchase for the Vortex Venom red dot sight?

Asked by: AndyDandy89
You will need plate #1 which comes with your Glock. You can get the screws from our Customer Care team - please give them a call at 800-426-0048 Ext. 6.
Answered by: Josh at Vortex Optics
Date published: 2018-08-22

Hi I have a Glock 17 gen 1 I want to mount a vortex viper red dot.  Which mount would I need. I saw above most Glocks

Asked by: Okie379
Thanks for the question! I would recommend heading over to www.egwguns.com to get the correct mount for your setup.
Answered by: Graham at Vortex Optics
Date published: 2018-08-13

II want to mount my Venom red dot to my Glock 19X. Which kit do I need?

Asked by: Walt
This mount is only designed to fit the Razor Red Dot. I would recommend this mount: http://www.egwguns.com/pistol-scope-mounts/docter-sight-mount-for-glock/
Answered by: Graham at Vortex Optics
Date published: 2018-04-24

I have a Glock 36. Will this hand gun mount fit? Also, does mounting the red-dot site create any problems with Kydex holsters? Thanks

Asked by: Mike
This mount will allow you to mount our Razor Red Dot on your Glock. The mount should not interfere with your holster as long as it does not come up to where the red dot would be mounted.
Answered by: Mike at Vortex Optics
Date published: 2018-04-03

I have a sig 226 navy i want to fix my razor red dot reflex on it. what is the proper mount?

Asked by: Ahmed
Here is a mount that will work on your setup: http://www.egwguns.com/pistol-scope-mounts/vortex-razor-mount-for-sig-p220-229-320/.
Answered by: Mike at Vortex Optics
Date published: 2018-03-28
  • y_2019, m_2, d_18, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_44
  • loc_en_US, sid_MT-5102, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 118.99ms
  • QUESTIONS, PRODUCT
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 39.14ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;