Banner
Title

Bubble Level

30 mm Riflescope Tube

Bubble Level Click to Enlarge
SKU: BL30
Alt Views
Thumbnail
Thumbnail
MSRP: $49.99
*Prices in US Dollars
Reviews:
Bubble Level is rated 4.1 out of 5 by 7.
  • y_2017, m_11, d_20, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_BL30, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getAggregateRating, 20.35ms
  • REVIEWS, PRODUCT
free shipping on orders over $60
Select a Model

Riflescope Bubble Level for 30 mm Riflescope Tube

For the most precise long-range shooting, use the bubble level to ensure that the rifle is perfectly vertical. This will eliminate potential error caused by shooting a canted rifle.

Mounts quickly and easily to the riflescope tube.



VIP Unconditional Lifetime Warranty:
Our Unlimited, Unconditional Promise to You! It doesn't get any better than this.


Rated 5 out of 5 by from Awesome bubble level at a great price! I put this on my Gen 1 PST 6-24 and it really helped me to focus on keeping my reticle level for longer shots. It's crazy how much one can miss their target due to rifle/reticle cant, and this bubble level helps eliminate. One less thing to worry about in the slew of variables that accompany long range shooting! I wouldn't hesitate to buy another.
Date published: 2017-11-02
Rated 5 out of 5 by from Must have This is must have if you shoot past 600 yards if your rifle isn't level then you won't hit the target. This bubble level is the sure fire way to know your rifle is ready to make that shot. The only problem I had with this level is its to thick and when I got mine there wasn't the Low pro level. So I had to put it on a lathe and take a little bit of it off to make it fit. Other than that it works like a champ and there's no reason you shouldn't have one on your scope.
Date published: 2017-06-15
Rated 3 out of 5 by from Good execution, limited compatibility I bought a couple of these to go on PST scopes on Remington 700 rifles. They are well made and I especially like the flat base so that it basically self levels against the scope base. The problem I ran in to was that I run the lowest possible rings I can, and these were too thick on the base to jive with my TPS and Badger rings. To make them work I would have to mill off a few thousands off the bottom edge. I'm sure they work just fine with Vortex branded rings.
Date published: 2017-06-15
Rated 1 out of 5 by from Loved it then Hated it I bought it with my Viper and used it for a while then all of the sudden on a coyote hunt it came unscrewed and fell off somewhere, I didn't use blue loctite. Maybe the one piece bubble is better.
Date published: 2017-06-15
Rated 5 out of 5 by from Scope Level Purchased this to install on a Viper PST, it is bright and easy to see. Have has no issues with slipping on the tube and has help up great so far.
Date published: 2017-06-15
Rated 5 out of 5 by from Improve my long distance shoots Improved my long distance shoots at the range and in the field! My grouping at 1000 yard got tighter best investment
Date published: 2017-06-15
Rated 5 out of 5 by from Perfect Bought for my benchrest 22 it's perfect to set up and even easier to use
Date published: 2017-07-28
  • y_2017, m_11, d_20, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_BL30, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 13.32ms
  • REVIEWS, PRODUCT

hi. what bubble level size should i order that would fit my Vortex Viper with capped turrets? thanks

Asked by: jun martinez
The bubble levels are sized to fit the scope tube on your rifle. If you have a 1 inch tube get the 1 inch bubble level, if you have a 30 mm tube you want the 30 mm bubble level. We have some Viper scopes that are 1 inch tubes and some that are 30 mm tubes so you will have to check your specific scope.
Answered by: Mike at Vortex Optics
Date published: 2017-11-01

Can you mount this to the scope without removing the scope from the rifle?
Asked by: Josh
Depends! If you have low rings the bottom piece of the level will not have enough clearance. Just went through this and had to remove my optic (Razor HD LH) with 1in Vortex precision rings.
Answered by: Scott
Date published: 2017-06-15

Can this be mounted on the right side of the gun, for left-handed shooters?
Asked by: Xrl
Yes, did it on my Tikka T3X.
Answered by: Scott
Date published: 2017-06-15

When installing the BL30, what are the torque specifications for the screws?
Asked by: FAW
We recommend torquing the screws to 12 inch pounds with no Loctite.
Answered by: Mike at Vortex Optics
Date published: 2017-08-12

Weight of each size?
Asked by: 3D-Seth
The 1 inch weighs 1.4 oz, the 30 mm weighs 1.7 oz, the 34 mm weighs 1.5 oz, and the 35 mm weighs 1.4 oz.
Answered by: Mike at Vortex Optics
Date published: 2017-06-15

How thick is the bottom part of the ring? I am trying to make sure that the level will clear the scope mount rail before I buy. A drawing would be helpful.
Asked by: Juha
The bottom part of the ring is .25" and the side where they meet is .5". We are continuing to update measurements on the website and should have them in the near future.
Answered by: Jon from Sales
Date published: 2017-06-23

I have a Vortex bubble level , but the bubble is much bigger than the two lines you use to correct the can't, making it difficult to know if it's actually level. Help !!!!!!!!
Asked by: None
Just put mine on and the bubble is approximately 1/8"smaller than the limit lines I,d says yours is defective Return it
Answered by: Clint
Date published: 2017-09-25
  • y_2017, m_11, d_20, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_BL30, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 60.83ms
  • QUESTIONS, PRODUCT
Rated 5 out of 5 by from Must have This is must have if you shoot past 600 yards if your rifle isn't level then you won't hit the target. This bubble level is the sure fire way to know your rifle is ready to make that shot. The only problem I had with this level is its to thick and when I got mine there wasn't the Low pro level. So I had to put it on a lathe and take a little bit of it off to make it fit. Other than that it works like a champ and there's no reason you shouldn't have one on your scope.
Date published: 2017-06-07
Rated 3 out of 5 by from Good execution, limited compatibility I bought a couple of these to go on PST scopes on Remington 700 rifles. They are well made and I especially like the flat base so that it basically self levels against the scope base. The problem I ran in to was that I run the lowest possible rings I can, and these were too thick on the base to jive with my TPS and Badger rings. To make them work I would have to mill off a few thousands off the bottom edge. I'm sure they work just fine with Vortex branded rings.
Date published: 2017-06-07
Rated 1 out of 5 by from Loved it then Hated it I bought it with my Viper and used it for a while then all of the sudden on a coyote hunt it came unscrewed and fell off somewhere, I didn't use blue loctite. Maybe the one piece bubble is better.
Date published: 2017-06-07
Rated 5 out of 5 by from Scope Level Purchased this to install on a Viper PST, it is bright and easy to see. Have has no issues with slipping on the tube and has help up great so far.
Date published: 2017-06-07
Rated 5 out of 5 by from Improve my long distance shoots Improved my long distance shoots at the range and in the field! My grouping at 1000 yard got tighter best investment
Date published: 2017-06-07
  • y_2017, m_11, d_21, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_BL30, stg, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 28.2ms
  • REVIEWS, PRODUCT

#VORTEXNATION