Banner
Title

Hunter 30 mm Rings

High Height [1.22 Inches | 31.0 mm]

Two per Package

Hunter 30 mm Rings Click to Enlarge
SKU: 30MRNG-H
Alt Views
Thumbnail
MSRP: $24.99
*Prices in US Dollars
Reviews:
Hunter 30 mm Rings is rated 4.5 out of 5 by 2.
  • y_2018, m_6, d_19, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_30MRNG-H, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getAggregateRating, 10.3ms
  • REVIEWS, PRODUCT

Select a Model

Hunter 30mm Riflescope Rings — High Height [1.22 Inches | 31.0 mm]

Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.
Made from aircraft-grade 6061-T6 aluminum for optimum strength.


Note
These Vortex Hunter Rings position the center of the riflescope tube at a height of 1.22 inches (31.0 mm) from the base.
Sold two rings per package.


VIP Unconditional Lifetime Warranty:
Our Unlimited, Unconditional Promise to You! It doesn't get any better than this.


Recommended Torque Specs
Base Clamp Thumb Screws Ring Screws
25–30 in/lbs 15 in/lbs
Rated 5 out of 5 by from GREAT PRODUCT EXCELLENT QUALITY AND VERY STABLE MOUNT, VERY LIGHT WEIGHT
Date published: 2017-07-29
Rated 4 out of 5 by from Nice rings for the price The are nice rings for the price, not as good as 0 rings but for the average 223 rifle they work great
Date published: 2017-07-28
  • y_2018, m_6, d_19, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_30MRNG-H, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 5.77ms
  • REVIEWS, PRODUCT

I want to mount your Viper HS 2.5-10X44 on my drilled and tapped Savage 110 Hunter .308 rifle. What rings/ mount setup do you suggest?

Asked by: Neil
I would recommend a 1-piece Picatinny rail from www.egwguns.com and a set of our 30 mm Precision Matched Rings 0.97" inch height for your setup.
Answered by: Graham at Vortex Optics
Date published: 2018-06-18

Hi Mike, Im mounting your Viper PST 4-16x50 EBR-1<br/>(MRAD) to a Savage bolt action 306.  Which mount/rings would you suggest using for the best results. Thanks 

Asked by: Bone7
I would recommend a 1-piece Picatinny rail from www.egwguns.com and a set of our 30mm Precision Matched Rings 0.97" inch height for your setup.
Answered by: Graham at Vortex Optics
Date published: 2018-05-25

I'm looking for a nice set of budget rings to go with my crossfire 2 4x24 on a DPMS AR15 and also are there any rings that would work with iron sites installed without removing the scope

Asked by: jm92gt
I would recommend using our 30mm Sport Cantilever mount with a 3" inch offset. This will allow you to get proper eye relief and still use your iron sites.
Answered by: Graham at Vortex Optics
Date published: 2018-05-02

I own a Ruger M77 Hawkeye Tactical .308 winchester. I have a Tijicon TR23-2 5x20x50. I do not have a pic rail, but I would like to purchase 20 MOA pic rail and I need to purchase the rings. What do you suggest? Thanks

Asked by: Doctor
I would go with a one piece rail from www.egwguns.com and a set of our 30 mm Precision Matched Rings in 0.97" height.
Answered by: Mike at Vortex Optics
Date published: 2018-04-19

What rings would you recommend for your 30 mm tube Crossfire II 6-24x50 on an Anschutz 1710 sporter rifle with the factory 11 mm dovetail?

Asked by: Mr.BB
You will need to get rings that fit the 11 mm dovetail like a set from Warne and you will need some high rings to clear the objective of your scope.
Answered by: Mike at Vortex Optics
Date published: 2018-04-02

I have a Ruger American predator that I want to mount a Leupold VX3i- 4.5-14x40 CDS-side focus 30 mm tube, that I want to mount as low as possible. Will the Hunter 30MRNG-L work?

Asked by: DesertRat
I would recommend using the medium height if you want to use the Hunter rings, or you can go with the low height Pro Rings.
Answered by: Mike at Vortex Optics
Date published: 2018-03-23

What is the best rings for mounting a crossfire ii 6x24x50 to a ruger american in 308.

Asked by: Danny
A set of our 30 mm high height Pro Rings will work for your setup.
Answered by: Mike at Vortex Optics
Date published: 2018-02-23

I am mounting a VIPER HST 6-24X50 scope on a Browning BAR II Safari. What is your recommendation for the rings? Is it the 1.22" rise?

Asked by: Clint
With a one piece rail from www.egwguns.com, I would use our medium height 30 mm Pro Rings for your setup.
Answered by: Mike at Vortex Optics
Date published: 2018-02-19
  • y_2018, m_6, d_19, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_49
  • loc_en_US, sid_30MRNG-H, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 6.09ms
  • QUESTIONS, PRODUCT
Torque Wrench Mounting Kit

Torque Wrench Mounting Kit

Tighten to the specified torque and not a bit more.

MSRP: $89.99

Buy Now: $69.99
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 29.19ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;