Banner
Title

Precision Matched Rings-30 mm

Height: 0.87 Inches | 22.1 mm

Two per Package

Precision Matched Rings-30 mm Click to Enlarge
SKU: PMR-30-87
Alt Views
Thumbnail
Thumbnail
Thumbnail
MSRP: $199.99
*Prices in US Dollars
Reviews:
Precision Matched Rings-30 mm is rated 4.9 out of 5 by 34.
  • y_2018, m_8, d_15, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_34
  • loc_en_US, sid_PMR-30-87, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getAggregateRating, 4.26ms
  • REVIEWS, PRODUCT

Select a Model

Precision Matched Rings — Height: 0.87 Inches | 22.1 mm

We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill. Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another. These Vortex rings are then serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize.

  • Weight (Per Ring): 60 Grams - 2.1 oz
  • Rugged, lightweight, anti-snag design
  • Robust, Grade 8 fasteners
  • 100% made in USA guaranteed for life

Note
These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 0.87 inches (22.1 mm) from the base. Will only work with Picatinny spec mounts—will not work with Weaver mounts. Sold two rings per package. Hex wrench included.


VIP Unconditional Lifetime Warranty:
Our Unlimited, Unconditional Promise to You! It doesn't get any better than this.


Recommended Torque Specs
Base Clamp Screws Ring Screws
45–50 in/lbs 15–18 in/lbs

Weight (Per Ring): 60 Grams - 2.1 oz

Rated 5 out of 5 by from Where's the beef? I'll tell you where the beef is...It is in these rings. Dear Lord these things are stout. In the event of a nuclear war, there will be two things surviving, cockroaches and these scope rings. They make me want to upgrade the rest of my gun to be as tough. Install was a snap, and just setting the scope down in the bottom halves i noticed it was engaged enough to not want to rotate. I put maybe 2 inch pounds on the screws and the scope was locked up tight. No need for lapping at all. Yes I torqued them properly in the end. But that goes to show you how they fit out of the box. I am happy with these rings. If I can figure out how to add a photo to this once I get to the range tomorrow I will.
Date published: 2017-06-15
Rated 5 out of 5 by from Perfect match with HST 6x24x50 for Ruger Precision Rifle These are extreme high quality rings that make a perfect match for the HST 6x24x50 when placing this optics package on the new Ruger Precision Rifle. The rings are outstanding and of the highest quality. If you want the best, look no further.
Date published: 2017-06-15
Rated 5 out of 5 by from The Best Rings Out There I bought a set of Vortex Precision Matched Rings-30 mm for a rifle over a year ago. Originally I ordered a set of Seekins Precision rings but they sent me a set of Vortex Precision Matched Rings. I did a little research and I think they are one in the same. Anyway since then the Vortex Precision Matched Rings are the only rings that I will use on a precision rifle. They are strong, light weight, not at all bulky and they look good. They stay aligned and tight so you will never loose your zero.
Date published: 2018-03-29
Rated 5 out of 5 by from Testament to their dedication to perfection! I bought these rings with the expectation I would need to do some touch-up work as I have done on every set of rings I have ever owned. They are sturdy and well built. Just a few passes with the lapping tool would reveal how well machined and matched these rings truly are!!!! I will buy these and gladly shell out the extra cost!!!!
Date published: 2017-09-03
Rated 5 out of 5 by from Best rings I have ever owned. I bought these rings a little over two months ago and I have not been disappointed yet. Hands down the best rings I have ever owned! Mounted to my Remington 700 in .30-06, the rings handle recoil no problem. Will make sure to get these ring for my next rifle.
Date published: 2017-07-31
Rated 5 out of 5 by from Love the beefy build: Warne Weaver mount beware Great product! I ran into an issue actually mounting the rings on a 2-piece Warne brand weaver mount on my .308. The slotted portion on the rings was thicker/wider than the slots on the weaver mount from Warne. I verified that I had the ordered/received the Weaver version of the Precision Matched Rings, and both sets had the W as the last portion of the product code. I then tried mounting the rings on an AR15 and a Warne 20MOA Long Action Tactical rail and it fit just fine. Speaking with Warne, they said the 20MOA rail has wider slots and is a mil-spec Picatinny rail, so I ended just ordering a Warne 20MOA Short Action Tactical rail for my .308 and another rifle that will get married up with a Vortex scope in the spring.
Date published: 2017-06-15
Rated 5 out of 5 by from Solid and dependable scope rings! I used these rings to hold my Gen 1 PST 6-24 on top of my custom SMR 7mm rem mag, and these rings are solid! I never experienced any issues because of the rings not doing their job. They are easy to install, hold the scope securely with no shifting under heavy magnum recoil, and they look great too! Couldn't ask for a better set of rings in my opinion.
Date published: 2017-11-02
Rated 5 out of 5 by from .87" plenty clearance, cheek position, 4" relief VORTEX HS-T, 6-24X50 on a SAVAGE 110 FCP-K, .300 WIN MAG over EGW 20MOA Base. .25+ inches clearance at the 50mm Objective lens with the flexible, Defender cap in place. These are STOUT!!
Date published: 2018-04-07
  • y_2018, m_8, d_15, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_34
  • loc_en_US, sid_PMR-30-87, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 23.63ms
  • REVIEWS, PRODUCT

What rings should i use for a remington 700 sps .308 for my viper hst 6-24x50mm scope?

Asked by: nick661
If you setup has a 1-piece Picatinny rail, I would go with a set of our 30 mm Precision Matched Rings 0.97" inch height.
Answered by: Graham at Vortex Optics
Date published: 2018-08-10

If I am mounting a Strike Eagle 4-24x50 scope on a Remington 700 Magpul .308, do the 0.97" Precision Match rings allow for enough clearance to also use the Defender Scope caps?

Asked by: Jordan
If you have a 1-piece Picatinny rail, the 0.97" inch Precision Matched Rings will provide enough clearance on your setup.
Answered by: Graham at Vortex Optics
Date published: 2018-08-09

I've got a Bergara B14 Ridge and want to mount a Viper HS 4-16x44. What rings and height would you recommend? Also, would it be the same for a Viper HS 4-16x50? If not what would you recommend for this scope? Thank you!

Asked by: butler3768
For both scopes I would recommend going with a 1-piece Picatinny rail from www.egwguns.com and a set of our 30 mm Precision Matched Rings 0.97" inch height.
Answered by: Graham at Vortex Optics
Date published: 2018-08-08

I have a savage BA 110 stealth in the 300 Winchester magnum. I'm going to be mounting a Vortex viper PST gen II in the 5-25 x 50. What height of rings should I get.

Asked by: Wayne
I would recommend going with a set of our 30 mm Precision Matched Rings 1.45" inch height for your setup.
Answered by: Graham at Vortex Optics
Date published: 2018-08-08

i've got a daniel defense and I just got a pst 3-15x44, what rings would be the lowest I could put on comfortably?

Asked by: Jack
I would recommend going with a set of our 30 mm Precision Matched Rings 1.45" inch height for your setup. This will be the most comfortable for your rifle.
Answered by: Graham at Vortex Optics
Date published: 2018-08-02

MOUNTING A VIPER PST 4-16 5OMM SCOPE ON MY REMINGTON 700 LA 30.06 LONG RANGE. HAVE A 20MOA PICATINNY RAIL. WHAT RINGS HEIGHT SHOULD I USE

Asked by: daniel
I recommend a set of our Precision Matched Rings 30 mm - .97" height for your setup.
Answered by: Josh at Vortex Optics
Date published: 2018-07-30

I have a Ruger Precision Rifle (6.5 CM) and I'm purchasing the Razor HD Gen II.  The Ruger has a 20MOA rail.  Which mount and rings are best for this setup given the 56MM objective lens?

Asked by: Jeff A
I would recommend going with a set of our 34 mm Precision Matched Rings 1.45" inch height for your setup.
Answered by: Graham at Vortex Optics
Date published: 2018-07-30

Mounting a PST on a Ruger Precision Rifle. My question is what would be the reason a person would use precision matched rings over the precision extended cantilever mount or vice versa?

Asked by: RPR shooter
Either the cantilever mount or 1.45" rings would be fine for your setup! Both would get you up to the proper height. The cantilever mount would provide a little bit more flexibility.
Answered by: Graham at Vortex Optics
Date published: 2018-07-24
  • y_2018, m_8, d_15, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_619
  • loc_en_US, sid_PMR-30-87, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 23.95ms
  • QUESTIONS, PRODUCT
Torque Wrench Mounting Kit

Torque Wrench Mounting Kit

Tighten to the specified torque and not a bit more.

MSRP: $89.99

Buy Now: $69.99
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 21.75ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;