Banner
Title

Precision Matched Rings-30 mm

Height: 0.97 Inches | 24.64 mm

Two per Package

Precision Matched Rings-30 mm Click to Enlarge
SKU: PMR-30-97
Alt Views
Thumbnail
Thumbnail
Thumbnail
MSRP: $199.99
*Prices in US Dollars
Reviews:
Precision Matched Rings-30 mm is rated 4.9 out of 5 by 34.
  • y_2019, m_1, d_19, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_34
  • loc_en_US, sid_PMR-30-97, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getAggregateRating, 2.56ms
  • REVIEWS, PRODUCT

Select a Model

Precision Matched Rings — Height: 0.97 Inches | 24.64 mm

We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill. Our Precision Matched Rings are kept in pairs throughout the manufacturing process — ensuring perfection from one set to another. These Vortex rings are then serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize.

  • Weight (Per Ring): 65 Grams - 2.3 oz
  • Rugged, lightweight, anti-snag design
  • Robust, Grade 8 fasteners
  • 100% made in USA guaranteed for life

Note
These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 0.97 inches (24.64 mm) from the base. Will only work with Picatinny spec mounts—will not work with Weaver mounts. Sold two rings per package. Hex wrench included.


VIP Unconditional Lifetime Warranty:
Our Unlimited, Unconditional Promise to You! It doesn't get any better than this.


Recommended Torque Specs
Base Clamp Screws Ring Screws
45–50 in/lbs 15–18 in/lbs

Weight (Per Ring): 65 Grams - 2.3 oz

Rated 5 out of 5 by from Where's the beef? I'll tell you where the beef is...It is in these rings. Dear Lord these things are stout. In the event of a nuclear war, there will be two things surviving, cockroaches and these scope rings. They make me want to upgrade the rest of my gun to be as tough. Install was a snap, and just setting the scope down in the bottom halves i noticed it was engaged enough to not want to rotate. I put maybe 2 inch pounds on the screws and the scope was locked up tight. No need for lapping at all. Yes I torqued them properly in the end. But that goes to show you how they fit out of the box. I am happy with these rings. If I can figure out how to add a photo to this once I get to the range tomorrow I will.
Date published: 2017-06-15
Rated 5 out of 5 by from Testament to their dedication to perfection! I bought these rings with the expectation I would need to do some touch-up work as I have done on every set of rings I have ever owned. They are sturdy and well built. Just a few passes with the lapping tool would reveal how well machined and matched these rings truly are!!!! I will buy these and gladly shell out the extra cost!!!!
Date published: 2017-09-03
Rated 5 out of 5 by from Perfect match with HST 6x24x50 for Ruger Precision Rifle These are extreme high quality rings that make a perfect match for the HST 6x24x50 when placing this optics package on the new Ruger Precision Rifle. The rings are outstanding and of the highest quality. If you want the best, look no further.
Date published: 2017-06-15
Rated 5 out of 5 by from The Best Rings Out There I bought a set of Vortex Precision Matched Rings-30 mm for a rifle over a year ago. Originally I ordered a set of Seekins Precision rings but they sent me a set of Vortex Precision Matched Rings. I did a little research and I think they are one in the same. Anyway since then the Vortex Precision Matched Rings are the only rings that I will use on a precision rifle. They are strong, light weight, not at all bulky and they look good. They stay aligned and tight so you will never loose your zero.
Date published: 2018-03-29
Rated 5 out of 5 by from Best rings I have ever owned. I bought these rings a little over two months ago and I have not been disappointed yet. Hands down the best rings I have ever owned! Mounted to my Remington 700 in .30-06, the rings handle recoil no problem. Will make sure to get these ring for my next rifle.
Date published: 2017-07-31
Rated 5 out of 5 by from Love the beefy build: Warne Weaver mount beware Great product! I ran into an issue actually mounting the rings on a 2-piece Warne brand weaver mount on my .308. The slotted portion on the rings was thicker/wider than the slots on the weaver mount from Warne. I verified that I had the ordered/received the Weaver version of the Precision Matched Rings, and both sets had the W as the last portion of the product code. I then tried mounting the rings on an AR15 and a Warne 20MOA Long Action Tactical rail and it fit just fine. Speaking with Warne, they said the 20MOA rail has wider slots and is a mil-spec Picatinny rail, so I ended just ordering a Warne 20MOA Short Action Tactical rail for my .308 and another rifle that will get married up with a Vortex scope in the spring.
Date published: 2017-06-15
Rated 5 out of 5 by from Solid and dependable scope rings! I used these rings to hold my Gen 1 PST 6-24 on top of my custom SMR 7mm rem mag, and these rings are solid! I never experienced any issues because of the rings not doing their job. They are easy to install, hold the scope securely with no shifting under heavy magnum recoil, and they look great too! Couldn't ask for a better set of rings in my opinion.
Date published: 2017-11-02
Rated 5 out of 5 by from .87" plenty clearance, cheek position, 4" relief VORTEX HS-T, 6-24X50 on a SAVAGE 110 FCP-K, .300 WIN MAG over EGW 20MOA Base. .25+ inches clearance at the 50mm Objective lens with the flexible, Defender cap in place. These are STOUT!!
Date published: 2018-04-07
  • y_2019, m_1, d_19, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_34
  • loc_en_US, sid_PMR-30-97, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 3.93ms
  • REVIEWS, PRODUCT

Hello, looking for a ring height recommendation for a Bergra HMR with a PST Gen II 3-15x44 FFP and a 20 MOA scope base. Thanks!

Asked by: Mark
Thanks for the question! I would recommend going with the 30 mm Precision Matched Rings 0.97" inch height for your setup.
Answered by: Graham at Vortex Optics
Date published: 2019-01-17

I have a T/C Compass in .308 and another in 6.5Creedmoor. I wanna mount the new Daimondback Tactical 6-24x50 scope on them. will I be alright .87 or go with .97. I'm thinking of putting a 20 MOA base under the scope.

Asked by: Herbie53
Thanks for the question! I would recommend going with the 0.97" inch height for your setup.
Answered by: Graham at Vortex Optics
Date published: 2019-01-15

What height rings should I get to mount a 30mm scope with a 50mm objective to ar-10 I am trying to go as low as possible.

Asked by: Thom
We recommend a cantilever mount on the AR platform for the proper height and clearance to establish a comfortable cheek weld. You'll also want to keep the rings on the receiver so unless you have a monolithic rail, you'll want to run a cantilever. The lowest rings you could run would be our PMR 1.26" rings I believe. Give us a call at 800-426-0048 Ext. 5 to discuss your model scope and setup!
Answered by: Josh at Vortex Optics
Date published: 2019-01-15

I’m mounting a diamondback tactical 6x24x50 on a Tikka T3 300 win mag with mountain tactical rail.  What height rings do you recommend?

Asked by: Hunter
I recommend the .97" height for your setup!
Answered by: Josh at Vortex Optics
Date published: 2019-01-14

I have a ruger American predator in 6.5 CM, if I mount a 50 mm scope on this rifle are the .87 height mounts high enough?

Asked by: Sean
Thanks for the question! I would recommend going with the 0.97" inch height for your setup.
Answered by: Graham at Vortex Optics
Date published: 2019-01-11

Before mounting to a steel picatinny base, should I degrease the base or leave a very light coat of oil on it? I'm afraid that the oil would decrease the grip between rings and base, but without it I'm afraid of rusting...

Asked by: Bence
It will not affect it. A light coat of oil wiped off will be sufficient!
Answered by: Josh at Vortex Optics
Date published: 2019-01-03

I have a Savage model 110 Hunter in 6.5 Creedmoor with the Accu Fit stock. I am purchasing a Viper HSLR 4X16x50 and would like to know which scope rings and mount you recommend? I am worried about scope bite for her with a shorter stock.

Asked by: JR 22
I recommend a one piece rail and a set of our .97" height Precision Matched Rings for that setup. As long as she's shouldering that rifle she should be alright!
Answered by: Josh at Vortex Optics
Date published: 2019-01-02

What height rings should I get to mount a 30mm scope with a 44mm objective to a Sig Sauer SSG3000 Patrol? I am trying to go as low as possible.

Asked by: Zach
Thanks for the question! I would recommend going with a set of our 30 mm Precision Matched Rings 0.97" inch height for your setup.
Answered by: Graham at Vortex Optics
Date published: 2019-01-02
  • y_2019, m_1, d_19, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_734
  • loc_en_US, sid_PMR-30-97, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 2.68ms
  • QUESTIONS, PRODUCT
Torque Wrench Mounting Kit

Torque Wrench Mounting Kit

Tighten to the specified torque and not a bit more.

MSRP: $89.99

Buy Now: $69.99
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 27.95ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;