Banner
Title

Lo Pro Bubblevel

Lo Pro Bubblevel Click to Enlarge
SKU: LBL-1
Alt Views
Thumbnail
MSRP: $79.99
*Prices in US Dollars
Reviews:
Lo Pro Bubblevel is rated 5.0 out of 5 by 3.
  • y_2018, m_12, d_10, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_LBL-1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getAggregateRating, 8.29ms
  • REVIEWS, PRODUCT
Select a Model

Riflescope Lo Pro Bubblevel 1-Inch

This slim, low-profile design allows the Bubblevel™ to be mounted on most scopes without removing the scope from the rifle. It is easily visible without losing the sight picture.

Mounts quickly and easily to the riflescope tube. Made in the USA.



VIP Unconditional Lifetime Warranty:
Our Unlimited, Unconditional Promise to You! It doesn't get any better than this.


Rated 5 out of 5 by from Lightweight rifle users dream! Great for the Lightweight/Ultralight rifle guys (or gals) weighs close to nothing! Holds tight and has a very low profile design. One tip to mention while installing is -while you tighten down the allen it will compensate itself toward the allen head side. Takes a few tries to get it tight and level at the same time. I mounted mine upside down and backward. Fits great under talley lightweight rings.
Date published: 2017-06-15
Rated 5 out of 5 by from Very accurate level! I find this level to be very true. The design allows the shooter to see the level without removing your head from the gun. The quality and design was built very good! Well done Vortex... Well done!
Date published: 2017-06-15
Rated 5 out of 5 by from MUST HAVE FOR ACCURATE LONG RANGE SHOOTING MOUNTED THIS ON MY DIAMOND BACK TACTICAL AND INSTANTLY NOTICED BETTER SHOT PLACEMENT
Date published: 2018-03-05
  • y_2018, m_12, d_10, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_LBL-1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 4.56ms
  • REVIEWS, PRODUCT

Should the scope/gun be level when you install the level? What is the best way to install? 

Asked by: Kris
When the level is installed, it should be level to the action. In order to establish that it is level to the action, the action needs to be level in the process.
Answered by: Josh at Vortex Optics
Date published: 2018-10-28

Would you recommend the lo pro bubble level or the standard bubble level for high recoil rifles?

Asked by: BigBoreBigSmack
Either will work well as they will both hold up to the recoil so it comes down to your preference.
Answered by: Josh at Vortex Optics
Date published: 2018-10-28

I have Razor HD II, left handed, where is the best place to attach the level?

Asked by: Dope behind the scope
It would be personal preference but most people prefer to move it just forward of the turret hub.
Answered by: Jon S.
Date published: 2018-10-28

Are you going to make the lo pro model for 35mm tubes.

Asked by: Hotgdrod
I am not aware of any plans to make the Lo Pro Level in 35 mm, we only offer one 35 mm scope and it comes with a bubble level included.
Answered by: Mike at Vortex Optics
Date published: 2017-12-21

Does installation require taking the scope off the rifle, or can the Lo Pro level be slipped on while the scope is attached? Thank you

Asked by: Tbone
The bubble level can be put on your scope with the scope mounted.
Answered by: Mike at Vortex Optics
Date published: 2018-10-28

What does the 30mm one weigh?
Asked by: Kramer
The 30 mm Lo Pro bubble level weighs 0.4 oz.
Answered by: Mike at Vortex Optics
Date published: 2017-06-15

I'm a left-handed shooter. Just want to make sure--can you mount the bubble level backwards so that it's on the right side of the scope?
Asked by: astronomer1
Yes, the bubble level can be mounted on either side of the scope.
Answered by: Mike at Vortex Optics
Date published: 2018-10-28

What inch pounds should the pro bubblevel be torqued too and where on the scope is the optimum position for mounting ?
Asked by: Capt. Doug
12 inch pounds should hold the bubble level in place.
Answered by: Mike at Vortex Optics
Date published: 2018-10-28
  • y_2018, m_12, d_10, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_LBL-1, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 3.81ms
  • QUESTIONS, PRODUCT
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 12.48ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;