StrikeFire Tactical 30 mm Ring Low
StrikeFire Tactical 30 mm Ring
Low Height [0.83 Inches | 21.0 mm]
One per Package
SKU: TRL
Reviews:
free shipping on orders over $60
overview
Tactical Low Ring for StrikeFire Red Dot — Low
The Vortex low ring mounts on Picatinny rails—positioning the center of the StrikeFire red dot scope tube at a height of 0.83 inches (21mm) from the base.
The low 30mm ring will be used for the StrikeFire red dot scope on most carry handle AR15 models. Carry handle's will also require a mounting rail. Sold one ring per package.
VIP Unconditional Lifetime Warranty:
Our Unlimited, Unconditional Promise to You! It doesn't get any better than this.
specs
| Recommended Torque Specs | |
| Base Clamp Hex Nuts | Ring Screws |
| 35–45 in/lbs | 15–20 in/lbs |
reviews
q_and_a
What rings would work best for mounting a strike eagle on a savage 220?
With a 1 piece picatinny rail from www.egwguns.com I recommend a pair of our 30 mm Pro Rings in low height.
Date published: 2017-09-21
Will the mounting bar fit a Weaver style slot or only the 1913 Picatinny?
The Tactical Rings are designed for use with a picatinny rail and will not work on a weaver style base.
Date published: 2017-09-21
Can I use low TRL rings on a Ruger American Predator short action with a Leupold VX•R 4-12x50mm?
I recommend using our Pro Rings in low height. The Tactical Rings are not designed to be used as a pair, they are designed for single ring use with red dots.
Date published: 2017-09-12
Are these rings made in China? I bought a set to use for a scope and the boxes they came in are Vortex branded but there are no Vortex marking on the rings themselves, and rings and boxes say "Made in China". Also, do they have the VIP warranty too?
Yes, they are made in China. If you are going to use them as a pair on a riflescope, we do recommend lapping them as they are designed for single ring use on a red dot and will need to be lapped to ensure they are suitable for use on a riflescope. They are covered under our VIP Warranty.
Date published: 2017-09-13
Can I get away with using low TRL rings on a Ruger American Predator short action with my Viper HS 44mm?
I suggest using our Viper 30 mm low height rings, as they are designed to be used as a pair while the Tactical rings are designed for single ring use with red dots.
Date published: 2017-08-18
I have an Arsenal Sam7. I bought a Midwest Industries side mount rail and the strikefire 2. The cantilever is way to high so I am not getting enough cheek weld. I also want to be able to lower 1/3 co witness. Would the low mount be fix this?
The low mount would be a better option for your setup, but I do not have that setup to test to make sure you can get lower 1/3 co-witness.
Date published: 2017-07-19
I have a Ruger Mini-14 and put a Vortex Optics StrikeFire II Red Dot Sight with Cantilever Mount on my rifle. I don't care for the cantilever mount I feel it is too high. Will the "Tactical Low Ring for StrikeFire Red Dot be the proper choice?
I recommend the medium Tactical Ring, the low ring is too low for most situations.
Date published: 2017-06-15
Hello, I have a S&W M&P15 that I have mounted a Rock River Arms Tactical Carry handle with picatiny rail. Can I use the Vortex Strikfire II and the Low profile mount ring for Lower 1/3 co witness in the event my optic goes out? Please advise.
This would depend on the type of carry handle mount you are using. I believe with a mount like this, and a low ring you would be able to co-witness - http://www.midwayusa.com/product/218781/ncstar-weaver-style-ar-15-carry-handle-mount-with-tri-mount-adjustable-side-tabs-matte. I hope this helps.
Date published: 2017-06-15
