Banner
Title

Tactical 30 mm Ring

Medium Height
[0.97 Inches | 24.6 mm]

One per Package

Tactical 30 mm Ring Click to Enlarge
SKU: TRM
Alt Views
Thumbnail
MSRP: $24.99
*Prices in US Dollars
Reviews:
Tactical 30 mm Ring is rated 5.0 out of 5 by 1.
  • y_2019, m_2, d_22, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_TRM, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getAggregateRating, 11.27ms
  • REVIEWS, PRODUCT

Select a Model

Tactical 30mm Red Dot Ring — Medium Height [0.97 Inches | 24.6 mm]

Robust 6-screw Tactical Ring is perfect for mounting red-dot optics, magnifiers, and other accessories with 30mm tube diameters to your Picatinny rail. When using this ring to mount a conventional riflescope, we strongly recommend lapping the rings for a proper and secure fit for your optic.


Note
This Vortex Tactical Ring positions the center of the riflescope tube at a height of 0.97 inches (24.6 mm) from the base.
Sold one ring per package.


VIP Unconditional Lifetime Warranty:
Our Unlimited, Unconditional Promise to You! It doesn't get any better than this.


Recommended Torque Specs
Base Clamp Hex Nuts Ring Screws
35–45 in/lbs 15–18 in/lbs
Rated 5 out of 5 by from Great rings The rings keep a nice tight grip on any scope expecially magnum calibers
Date published: 2017-07-28
  • y_2019, m_2, d_22, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_TRM, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 2.29ms
  • REVIEWS, PRODUCT

what height mount would you recommend for mounting a strikefire II on a H&R excell auto 5 shotgun

Asked by: Gary
I recommend the low height tactical ring on a one piece picatinny rail.
Answered by: Josh at Vortex Optics
Date published: 2019-01-29

on the six screw 30mm tactical rings, what is the tightening sequence?

Asked by: rikoshay
You want an even gap on each side, and 15-18 inch/lbs of torque. You'll want to tighten those similar to a car tire, and you'll have to do that to get an even gap.
Answered by: Josh at Vortex Optics
Date published: 2019-01-14

What size ring should I use to mount strike fire 2 red dot to my db15 5.56 ar with still able to use magpul gen 2 mbus front and rear backup sights 

Asked by: Jcshabaz
You should use the Extra high lower 1/3 or Extra high absolute height depending on what type of co-witness you'd like! Give us a call at 800-426-0048 Ext. 5 if you have further questions.
Answered by: Josh at Vortex Optics
Date published: 2019-01-03

I am trying to not use my cantilever for my strikefire 2 what is the difference between th 1/3 extra high and extra high absolute. I have back up sight front and rear and am trying to achieve cowitness using a ring 

Asked by: Jcshabaz
The difference in height is 3 mm, and one is for an absolute co-witness and the other is for a lower 1/3 co-witness. Please refer to this link regarding what each co-witness looks like - https://www.google.com/search?q=lower+1/3+vs+absolute+co+witness&source=lnms&tbm=isch&sa=X&ved=0ahUKEwioka6R4eDeAhXCrIMKHS1DDHcQ_AUIDigB&biw=1920&bih=949#imgrc=taqMUXhLAPBAQM: Give us a call if you have further questions - 800-426-0048 Ext. 5.
Answered by: Josh at Vortex Optics
Date published: 2018-11-19

I have a Ruger Precision Rifle in .308 and have the Mil Dot Viper 6.5-20 X 44 PA scope. I purchased the Vortex Optics Tactical 30mm Rings, Extra High. Were these rings a good choice for my equipment or is there a better alternative?

Asked by: AzMike
Thanks for reaching out! Yes, a far better option would be our 30mm Precision Matched Rings 1.45" for your setup - http://vortexoptics.com/product/vortex-precision-matched-rings-30mm-riflescope-145 The tactical rings aren't paired but work well for red dots and magnifiers!
Answered by: Josh at Vortex Optics
Date published: 2018-11-19

What scope mount height would you recommend for a strike fire attached to a remington 870?

Asked by: hunter2
Thanks for the question! If you have a 1-piece Picatinny rail, I would recommend going with the Low ring for your 870.
Answered by: Graham at Vortex Optics
Date published: 2018-11-06

Do these rings need to be lapped if used in pairs to mount a scope?

Asked by: Roughneck
Thanks for the question! Yes, these rings are primarily designed to be used with red dots, so if using them for a rifle scope we suggest lapping them. Otherwise, we do offer rings that come in a pair designed for rifle scopes.
Answered by: Graham at Vortex Optics
Date published: 2018-11-05

Will this be ok to replace the cantilever mount on the Strikefire II red/green dot?  

Asked by: Trap
Yes, that'll work. It depends on what height you want to mount it it though.
Answered by: Josh at Vortex Optics
Date published: 2018-10-23
  • y_2019, m_2, d_22, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_37
  • loc_en_US, sid_TRM, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_vortex-optics
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 7.04ms
  • QUESTIONS, PRODUCT
Torque Wrench Mounting Kit

Torque Wrench Mounting Kit

Tighten to the specified torque and not a bit more.

MSRP: $89.99

Buy Now: $69.99
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getReviews, 15.76ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;